Description
the ready-configured device includes: • as a stand u. Desktop unit usable • usable chamber volume 55 l • usable space (xL in mm) 410x 460 (16&'&'x 18 &'&') • operating pressure 2.8 / -1bar • sterilization temperature 98 ° C – 138 ° C • adapted power consumption of 4KW (3N, 400V, 60Hz, 16A) • TV-certified motorized safety quick-release with lip seal • Separate integrated steam generator of the latest technology with dry heaters • Integrated storage tank for demineralised water for steam generation (also manually fillable), level monitoring • Thermosperf according to TRB 402 and DIN 61010-2 • flexible PT 100 reference probe for liquid sterilization (time release over medium temperature) • gravity venting and pressure swing venting (annihilation sterilization) • integrated evaporative condensation, water cooled, temperature controlled, adjustable • validation nozzle • safety valve, TV tested component • internal memory chip for storage of up to 150 cycles (k can be retrieved later) • RS 485 interface for data transmission • Hunt for interior drainage • Timer function • Powder coated panel • Integrated rapid re-cooling – Up to 80% time saving for cooling cycle against self-cooling – Double jacket cooling from integrated storage tank – Additional support pressure in the Cooling phase to prevent liquid loss in the sterilized material – including integrated fan in the interior to avoid temperature gradients and faster recooling – no cooling water consumption • Vacuum device for simple and fractionated pre-vacuum and – Drying vacuum with freely programmable drying times and jacket heating Fully automatic microprocessor control with the following programs open programs – 3 solids programs – 2 programs for waste sterilization in the destruction bag – 1 liquid waste program – 4 liquid programs passwo Protected programs – 10 programs freely programmable as solids, garbage or liquid programs Each program can be configured by the operator himself (sterilization time, sterilization temperature) A separate name can be assigned for each program (according to customer requirements)